Birth of a Monster

Sometimes I like to stay late at work, I’ve got a nice desk, a decent computer, and a mini-fridge full of drinks right behind me. So even after I’m off work, I sometimes stay up here and work on side projects or just browse the web. Yesterday, I decided to do something a bit more creative, I decided to build a monster.

We recently came into the possession of several LaCie external hard drives. Most of these are 1.6TB and can use firewire or USB to connect to a computer. The downside to these drives, is that they aren’t actually one single drive, each one is an enclosure with 4 IDE drives inside it setup to use JBOD or something similar to RAID 0. If even one of those drives dies, the entire LaCie is lost. Needless to say, we don’t have a lot of use for what amounts to a giant hard drive with a death wish.

So I figured, lets see how many I can hook up to one system, then software raid them and see how fast they are. I had a dual 2.4Ghz XEON box laying around, so I threw in a bunch of firewire cards. I had to remove the entire back of the case just to fit the cards, otherwise we wouldn’t be able to use the card on the far left or the far right.

Firewire - The Monster

This server is stuffed full of firewire cards.

As you can see, I also had to remove the back panel of the firewire cards, since I didn’t have any half height ones to use. All in all, it makes for quite an ugly setup. Here’s the front and back of the entire thing:

The Monster

I use only the best of out-dated equipment.

The Monster (back)

This is actually fairly clean compared to some of the co-located servers our customers have setup.

As of right now I’ve got mdadm (the Linux software raid utility) building a RAID 6 out of the 1.6TB drives. When I first started building the array I was given an ETA of 1,500 minutes. For those of you that can’t do the math in your head (I can’t), that’s 25 hours! Right now it’s at about 80% complete. I’ll update this article sometime tomorrow, after I’ve got the array formatted for ext3,  which will probably take quite awhile.

UPDATE:

The raid finally finished building, in total it took just under 24 hours, it took another 45 minutes to format the partition to ext3. I ran a quick test with hdparm to see how fast the array was, the individual drives are capable of about 70MBps and the array as a whole clocks in at around 150MBps. Not great, but not too bad either, the real test will be seeing how long the array stays online, since the LaCie drives aren’t exactly the most robust storage devices.

4 comments for “Birth of a Monster

  1. Rabbit
    April 9, 2009 at 1:17 am

    I like the pictures. More pictures!!

  2. October 3, 2015 at 4:15 am

    If I remember corrtcely, the 300GB drive is supposed to come out at something like $700USD at first, but it was not official. A bit expensive, but I’m sure that the price will be dropping quickly..

  3. November 11, 2015 at 7:52 am

    If you’re looking to buy these articles make it way easier.

Leave a Reply

Your email address will not be published. Required fields are marked *